Solid Tech logo

Solid Tech is a Swedish company specialising in sprung isolation systems for hifi. Their two main products, the Radius equipment stand, and the aptly named Rack of Silence (which needs no further explanation!) are both manufactured to the highest standards and would fit visually in to most listening rooms, though the Radius, with its wooden shelves might suit a wider range of environments.

The beauty of all Solid Tech products (except the Feet of Silence which use rubber) is the use of the humble steel spring, in various configurations, and in varying quantities, to isolate equipment from each other and from the outside world. So, unlike certain air-bearing systems, there is no ongoing maintainance. It is also possible to change the load bearing capabilities of individual shelves by simply adding or subtracting springs at will, without having to dissassemble the stand first, a brilliantly simple but effective scheme.

Both of these stands must generally have at least two rigid non suspended shelves to give the system structural rigidity (you might opt to place non critical components on the fixed shelves, such as power supplies, or you might choose not to use them at all), but after that, it's up to you how you configure the isolation for the rest of the shelves. Additionally, either system can be fitted with "Disc of Silence" sprung feet in place of the usual spikes to give yet another stage of isolation which benefits the whole stand. And, the state-of-the-art Rack of Silence can even have additional isolators right underneath individual pieces of equipment, for an incredible three stages of isolation in total!

We've not seen such a well made and cleverly conceived support system before - you have to see it working to believe it, and you will also hear your equipment giving its best for the first time. Yes, it's a bit daunting at first, particularly in respect of ordering the right bits (we are here to help you), but once understood, it's actually very simple, like the best ideas usually are. Best of all, we get everything direct from the manufacturer in Sweden, with no "middleman" involved, so are able to sell it on to you at very competitive prices.


Radius

Our Radius Solo info & pricing sheet for you to print

Solid Tech Radius stand

Radius Solo

Our Radius Solo info & pricing sheet
for you to print

Solo top shelf (fixed) - GBP 132.00
Solo top shelf (sprung) - GBP 178.00

Solo normal shelf (fixed) - GBP 97.00
Solo normal shelf (sprung) - GBP 153.00

Pillars 65.5mm (4) - GBP 26.00
Pillars 150mm (4) - GBP 40.00
Pillars 234.5mm (4) - GBP 50.00
Pillars 319mm (4) - GBP 64.00

Base pillars 65.5mm (spikes)(4) - GBP 37.00
Base pillars 65.5mm (isolators)(4) - GBP 185.00

General info:
Solo shelves are 680mm wide by 500mm deep
Space between pillars for equipment: 520mm
Shelves are available as Black, Birch, Cherry, Oak, or Walnut,
and the new Mocca (brown stained Oak veneer) finish

* Important Note: Prices only apply when buying a complete rack (pillars+bottom pillars+shelves).
If you only want individual parts (which don't form a complete rack) there is unfortunately a 50% surcharge.

Radius Duo NB: Shelves on the Duo system are only available fixed, not sprung

Duo top shelf - GBP 161.00

Duo normal shelf - GBP 161.00

Pillars 65.5mm (6) - GBP 40.00
Pillars 150mm (6) - GBP 60.00
Pillars 234.5mm (6) - GBP 76.00
Pillars 319mm (6) - GBP 96.00

Base pillars 65.5mm (spikes)(6) - GBP 56.00
Base pillars 65.5mm (isolators)(6) - GBP 277.00

General info:
Duo shelves are 1270mm wide by 500mm deep
Space between pillars for equipment: 520mm
Shelves are available as Black, Birch, Cherry, Oak, or Walnut,
and the new Mocca (brown stained Oak veneer) finish

* Important Note: Prices only apply when buying a complete rack (pillars+bottom pillars+shelves).
If you only want individual parts (which don't form a complete rack) there is unfortunately a 50% surcharge.

Rack of Silence

Solid Tech Rack of Silence stand

The Rack of Silence doesn't use conventional shelves, it has cross members (as you can see from the picture) upon which sit 4 sliding aluminium brackets which can be moved into place to support your equipment. This is good in that it eliminates solid shelves as a source of resonance and colouration.
The sliding brackets can either be positioned so as to be under the existing equipment feet, or away from the existing feet (you might need to do this where your equipment has three rather than four feet).

Rack of SilenceDetail of equipment support brackets

Unlike the Radius system, the pillars are "one piece" - you just order one set, and that determines the height of the stand.

Light duty cross member 40kg max (fixed) - GBP 182.00
Light duty cross member 5 to 40kg (sprung) - GBP 242.00
Heavy duty cross member 80kg max (fixed) - GBP 235.00

Set of 4 wooden brackets for cross members to attach further isolators (not included) under equipment - GBP 25.00
Set of 4 aluminium adaptors for the same purpose - GBP 108.00

Pillars 300mm (4) - GBP 130.00
Pillars 600mm (4) - GBP 181.00
Pillars 900mm (4) - GBP 236.00
Any of the above fitted with bottom spring isolators instead of spikes, add GBP 170.00

General info:
Overall width of stand (space required) : 700mm
Overall depth of stand (space required) : 530mm
Space (width) between pillars for equipment: 500mm
Cross members are available as Black lacquered or Cherry stained

* Important Note: Prices only apply when buying a complete rack (pillars + crossmembers).
If you only want individual parts (which don't form a complete rack) there is unfortunately a 50% surcharge.


Isoclear

Packs of isolation feet (sets of 3 or 4) to use under individual items of equipment

Solid Tech Isoclear isolators

 

Isoclear detail

Isoclear, set of 3, 15kg total capacity - GBP 52.00
Extra spring set for the above to raise total capacity to 35kg - GBP 13.00

Isoclear, set of 4, 20kg total capacity - GBP 67.00
Extra spring set for the above to raise total capacity to 45kg - GBP 18.00


We also supply Solid Tech:
Discs of Silence isolators
Feet of Silence isolators

Please enquire about prices

Further product information can also be found at Solid Tech's own website (opens new page).

Back buttonHome page buttonOrder page button